# How to use HWID Spoofer

<details>

<summary>Requirements (Important)</summary>

Before using the spoofer, ensure that both your Antivirus (external or Windows Defender) and Firewall are turned off.

</details>

<details>

<summary>Loader Setup</summary>

**HOW TO INSTALL**

**Step 1.** Download the loader by[ Clicking here](https://mega.nz/file/aAUxzabA#fSNZL4XTuEEQBQzW8cPCHz6fA6dKZrwpxE2sSbB_u_M)

**Step 2.**  Sign in using your license key

Step 3. Once logged in, click the **arrow icon** on the right-hand side to expand the advanced panel.

Step 3. Click **Refresh**.

Step 4. Take a **screenshot** of the serials. Save the screenshot to your **Desktop** (or another easily accessible location).

Step 5. Click **Change Seed** multiple times (recommended: 3–5 times).

Step 6. Select all required options, for example:

* **ARP (Required for EAC)**
* **TPM** (required for EAC)
* GPU
* Monitor

Step 7. Start the spoofing process and wait until it fully completes.<br>

<br>

<br>

<br>

</details>

<details>

<summary>Troubleshooting</summary>

1. ## Most common error codes when starting the launcher:,

   > ***#10000004*** Make sure AV/EDR is not running and you are not infected by a rootkit.

   > ***#37070000*** Make sure Faceit/ESEA/Vanguard driver is not running.

   > ***#3B000000*** Make sure **Core Isolation** and **Memory Integrity** options are disabled in Windows Defender settings, then open `cmd.exe` as admin, type the following: copy and paste the following command: `bcdedit /set hypervisorlaunchtype off & reg add HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard /v EnableVirtualizationBasedSecurity /t REG_DWORD /d 0 /f & reg add HKLM\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\WindowsHello /v Enabled /t REG_DWORD /d 0 /f`, hit Enter and restart PC. Alternatively, disable Intel VT-X / AMD SVM in your BIOS settings. Also make sure that Vanguard/Faceit/ESEA are deleted.

   > ***#37100022*** Hold `SHIFT` and restart your PC.

   > ***#3C000101*** Windows build number requirement is not met, the minimum supported build number is `19041`.

   > ***#3C000110*** Multiple running instances of the launcher are not allowed.
   >
   > \#3C000105 Disable Intel VT-X / AMD SCM in bios settings
2.

```
## WARNING AND COLOR MEANINGS,
```

```
1.  **Orange GPU**

    > if the GPU is orange then a guy either has AMD GPU or old NVIDIA driver

    **Orange Monitor**

    > Usually due to windows 11 (Rust doesn't track monitor hwid)

    **Orange #07**

    > \> Means you have a USB plugged in

> ## [EFI warning](https://imgur.com/8O8eNFD),
>
> The EFI warning indicates that your system is loaded in legacy BIOS mode. The reasons for this may be as follows: either you have a legacy motherboard that doesn't support UEFI, or your boot drive has an MBR partition style. Legacy mode has its drawbacks, therefore, UEFI mode is preferred. If your motherboard supports UEFI, then all you need to do is convert your boot drive's partition style to GPT.

> ## [Unknown miniport warning](https://imgur.com/a/tYK3mRd),
>
> If you receive this warning, it's likely that your storage device controller is operating in RAID mode. The specific steps and option names may vary among motherboard vendors, but here is a common checklist to help you turn it off using the system's firmware settings menu:
>
> * SATA operation mode must be set to AHCI.,
> * Intel RST must be turned off.,
> * NVMe RAID mode must be turned off.,
> * Intel VMD must be turned off.,
>
> If you encounter a BSOD loop after applying some changes, then wait for the Windows troubleshooting menu to appear and follow these steps:
>
> 1. "Advanced options",
> 2. "Troubleshoot",
> 3. "Advanced options",
> 4. "Startup settings",
> 5. "Restart",
> 6. "5",
> 7. Restart PC,
>
> Some firmware may hide options until a specific key combination is pressed. In such cases, you may need to contact a customer support service of your motherboard manufacturer for assistance.
```

</details>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://ssz-services.gitbook.io/guides/temp-hwid-spoofer/exception-spoofer/how-to-use-hwid-spoofer.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.